Standard Ballast Pump | Ballast Pumps

Locate A SHURFLO Marine Dealer Near You

Marine Products

Standard Ballast Pump

The Shurflo Standard Ballast Pump was specially designed and developed for high capacity ballast tank applications in ski and wake boats, providing rapid fill and drain rates in a readily adaptable configuration, able to operate on a 25 Amp circuit. The high efficiency, high torque motor in combination with a high modulus neoprene compound impeller provide fast priming, long life, and consistent performance. Close internal tolerances help reduce leak back when the pump is mounted below the ballast tank. The Standard Ballast is built on the latest Shurflo motor series which includes fully sealed heavy die cast end bells, electro-coat finish throughout, and a steel mounting plate for reliable performance and durability in engine compartment conditions.


California residents: see Proposition 65 information

Data Sheet / Replacement Parts




SHURFLO 3300 STANDARD Ballast Pump

Model Numbers OEM/Aftermarket

3300-100, 3300-101


12 VDC

Port Size Inlet/Outlet

1/2" Internal Pipe Threads 1" External Hose Barb

Dimensions Inches/Millimeters

6.62" X 4.75" X 3.61" [168 X 121 X 92mm]

Flow Rate GPM/LPM

12 GPM [45.7 LPM]



12 VDC Sealed Corrosion Resistant Electro-Coated Motor
14 AWG Lead Wires
Reversible Flexible Impeller
Bronze Pump Body
Self-Primes up to 4 feet vertically
Ports: ½” Internal Pipe Threads,
1” External Hose Barb
Ignition Protected
CE and IMCI certification

OEM 12 GPM [45.7 LPM]


Aftermarket 12 GPM [45.7 LPM]

← Back to | Ballast Pumps