Locate A SHURFLO Industrial Dealer Near You

Industrial Products

Stainless Steel Close Coupled Flexible Impeller Pump

The now SHURFLO® 316 stainless steel self-priming, positive displacement, flexible impeller pumps provide a nearly pulseless flow with no metal-to-metal contact. Features 316 stainless steel pump body (impregnated with Teflon®)), cover and wear plates, stainless steel shaft, Viton mechanical-type seal and o-rings with Nitrile impellers. Models have built-in cam profile for extended impeller life, concave manifold protects the impeller from intermittent dry run damage and increased startup suction lift. Mounted directly to NEMA frame AC Totally-Enclosed Fan-Cooled (TEFC) motors using an easy-installation package, or as pump heads only for custom installations. Single-phase motors are thermally-overload protected.


Uses: Handles a wide range of industrial, marine, agricultural and commercial applications where non-abrasive fluids compatible with pump wet-end construction component materials are pumped. Pumps are suitable for the transfer of non-lubricating fluids, mild abrasives, fluids containing small particles in suspension, and a wide variety of viscous fluids such as petroleum-based oils, silicone greases, and hydraulic fluids. The portable transfer units are ideal for water drainage transfer, barrel emptying, machine coolant recycling, and an assortment of related utility activities.


L-4093 OIPM

L-4082 Motor Manual

Features & Benefits

Pumps are Supplied with 56C Face Motors and Totally-Enclosed Fan-Cooled (TEFC) Construction
Capacities up to 22.8 GPM at 1725 RPM
Maximum Discharge Pressure is 25 PSI (60 Ft. of Head)
Max. RPM: 3450 (1725 with Supplied Motors)
Suction Lift to 12 Ft
Pumps can Operate Bi-Directionally (Reversible)
Temperature Range with Nitrile Impellers is 0°F - 180°F (Optional Neoprene Impeller is 15°F - 130°F)
NPT Ports (3/4" to 11⁄4")
Maximum viscosity for pumps with standard electric motors up to 500 SSU and 25 PSI (60 ft. of head) at 1725 RPM or run at reduced speeds to handle a wide range of pump fluid viscosities (up to 2500 SSU) and specific gravity (up to 1.3). DO NOT pump oils or petroleum derivatives with Optional Neoprene Impellers. (Maximum Torque Loads are Found in the Performance Chart.)
Pumps can Operate Bi-Directionally (Reversible)
Features 316 Stainless Steel Pump Body (impregnated with Teflon®), Cover and Wear Plates, Stainless Steel Shaft, Viton Mechanical-Type Seal and O-Rings with Nitrile Impellers. Models have Built-In Cam Profile for Extended Impeller Life, Concave Manifold Protects the Impeller from Intermittent Dry Run Damage and Increased Startup Suction Lift
← Back to | Motor Mounted