Noryl Pedestal Centrifugal Pumps | CRP Series

Locate A SHURFLO Industrial Dealer Near You

Industrial Products

Noryl Pedestal Centrifugal Pumps

The SHURFLO® pedestal Noryl® centrifugal pumps produce high flow rates under moderate head conditions. 


This centrifugal series is designed for industrial chemical applications configured with TEFC (totally enclosed fan-cooled) motors. The pumps are made of Noryl, which is non-metallic, chemical-resistant to most acids, alkalis, and inorganic solvents.  This material is stiffer under pressure and temperature than the Polypropylene series. The Noryl series handles inlet booster pressures to 30 psi and a maximum temperature of 180° F. These pumps are equipped with a unique chemical-resistant carbon ceramic mechanical seal with Viton® elastomer having the stainless steel components sealed in Noryl allowing for a complete non-metallic Noryl wet end. This unique seal guarantees reliability through simplicity and balance of design. Even the motor and pedestal drive shaft is protected by the seal design.


California residents: see Proposition 65 information

Features & Benefits

Capacities to 110 GPM, Heads to 95 ft
1/3 to 3 HP AC Requirement Range
Discharge can be Rotated in 90-Degree Increments
All Pumps have 1 1/2" Female NPT Inlet and Outlet Ports
Maximum Operating Speed is 3600 RPM
Pedestal-Mount Models feature a 5/8" Diameter; 316 Stainless Steel Solid Shaft; a Corrosion-Resistant Coated Cast Iron bearing Housing and Sealed Ball Bearings
Standard Pump Models (at 3450 RPM) will Handle Specific Gravities to 1.1 (at 100 SSU or less)
Standard Pump Models (at 3450 RPM) will Handle Specific Gravities to 1.1 (at 100 SSU or less)
← Back to | CRP Series